Page Title

13RA2BX5

DIGITAL

CONTROLLER

CONTROLLER FEATURES:

The 13RA2BX5 controller has been designed to interface with pneumatic, hydraulic or electromechanical devices. This controller will interface with industry standard switches and sensors and is PROFIBUS capable. All digital mobile controllers come with free programming software and a program template to facilitate fast control program development.

Ideally suited to extreme automotive and industrial applications, static or mobile
Environmentally sealed for extended service life, IP67
Mechanical locking connectors, (water tight)
Rugged heavy duty design with output short proof protection
In-System flash programmable
PWM capable outputs with battery voltage monitoring
Dual RS-485 Communication interface with maximum 64-controller network
4 position DIP switch for equipment options
Integrated fault Tell-Tail LED providing feedback for diagnostic monitoring
Digitally hardened against EMI and ESD
Operating temperature - 40°C to +85°C
Operating voltage 9 to 30 VDC
Compact size of 4.65" x 5.24" x 1.41"
Lead-Free design
UL 94V-0 Flame Retardant Classification
SAE J1455 - Recommended environmental practices for electronic equipment design (Heavy duty trucks)
ASAE EP455 - Over voltage and reverse polarity protected
SAE J1113 - Recommended practices for shock, vibration and electromagnetic compatibility with immunity to conducted transients on power leads
2 Year Warranty

13 - Digital inputs

2 - Analog inputs selectable

1 - Frequency input selectable

5 - discrete outputs

4 - PWM outputs capable

2 - RS-485 COM ports

Electrical Parameters:

Input resistance: 3.3K Ohms

Input voltage range: +/- 30 VDC

Pulse input range: +/- 200VDC @ 15% D.C.

Analog voltage range 0 to 5 VDC

Frequency input: 0 to 100KHz

Operating voltage: 9 VDC to 30 VDC

Quiescent current: 18mA

Operating Temperature: - 40°C to +85°C

Environmental protection: Nylon 6/6 thermoplastic sealed housing with mechanical locking connectors

Output resistance: 0.038 Ohms @ 25°C

Output current: 3 Amps maximum continuous.

Outputs can be combined for high power output

Outputs are short circuit protected and open circuit monitored

Inductive load protected, repetitive 3 Amp maximum

Voltage swing: 0V to B+ (Battery Voltage)

PWM duty cycle: 0 to 100%

Reverse voltage protected

100% CMOS logic for greatest noise immunity

MCU Parameters:

Microchip RISC PIC16F 8-bit Microcontroller

High performance Flash Microchip PIC16F874A

20Mhz = 200nS Fast execution time

4 kByte Flash memory

128 Byte EEPROM

192 Byte RAM

Interrupt driven timing control

8 level deep hardware stack

Brown-out detection circuitry for controller reset

Special MCU Features:

10-bit PWM modules

Power-on reset (POR)

Power-up timer (PWRT)

Watchdog timer (WDT)

Power saving sleep mode

In-circuit programming

Controller data sheet and connection detail…………………………...

Free programming template…………………………………………...

For best printing, check PDF viewer box for "Print as Image"

Microchip MCU datasheet PIC16F874A……………………………..

Free MPLAB IDE controller programming software……...………….

Connector with side locking feature:

12 Pole interface connector P/N CON12GD

Grey polarization "A" cavity

Contact socket-solid:

The contact socket is crimped to the lead wires

20 to 24 AWG 7.5 amp maximum

Contact socket, 15 per package P/N CONSSD

Connector sealing plug:

This plug allows for sealing of unused input or output cavities

Sealing plug, 10 per package P/N CONPD

Contact socket-formed:

The contact socket is crimped to the lead wires

16 to 18 AWG 13 amp maximum

Contact socket, 100 per package P/N CONSFD

Hand crimp tool, stamped and formed contacts:

This hand tool will crimp contacts for both

16 to 18 AWG sockets

Crimp tool, S&F P/N CONTSFD

Hand crimp tool, solid contacts:

This hand tool will crimp contacts for both

20 to 24 AWG sockets

Crimp tool, Solid P/N CONTSD

Connector with side locking feature:

12 Pole interface connector P/N CON12BD

Black polarization "B" cavity

13RA2BX5 Sales Brochure…………………………………………...