2CM2

DIGITAL

CONTROLLER


2 - Digital inputs

2 - High power outputs

PWM capable outputs

Specifications:

Electrical Parameters:

Input resistance:  1.6K Ohms                             

Input voltage range: +/-30 VDC

Pulse input range: +/- 200V @ 15% D.C

Frequency input: 0 to 450Hz

Operating voltage: 9 VDC to 30 VDC

Quiescent current: 4mA

Operating Temperature: - 40°C to +85°C

Forced convection required above +55°C      at maximum output

Environmental protection:                            Gelatinous silicone conformal

Output resistance: 0.038 Ohms @ 25°C

Output current: 5 Amps maximum continuous.

Outputs can be combined for high power output

Outputs are short circuit protected and open circuit monitored

Inductive load protected, repetitive 3 Amp maximum

Voltage swing: 0V to B+ (Battery Voltage)

PWM duty cycle: 0 to 100%

Reverse voltage protected

100% CMOS logic for greatest noise       immunity

MCU Parameters:

Microchip RISC PIC12F 8-bit Microcontroller

High performance Flash Microchip PIC12F508

4MHz = 1uS Fast execution time

512 Byte program memory

25 Byte RAM

Pseudo interrupt driven timing control

2 level deep hardware stack


Special MCU Features:


Power-on reset (POR)

Device reset timer (DRT)

Watchdog timer (WDT)

Power saving sleep mode


Controller data sheet and connection detail…………………………...

Free programming template…………………………………………...

For best printing, check PDF viewer box for "Print as Image"

Microchip MCU datasheet PIC12F508……………………………….

Free MPLAB IDE controller programming software……...………….

Card edge mounting socket:


8 Position socket connector                            P/N   CON8BN



Accessories:

Home | Products | Support | Order | Contact | Legal                  Copyright Interphasic LLC. All rights reserved

CONTROLLER FEATURES:

The 2CM2 controller has been designed to interface with pneumatic, hydraulic  or electromechanical devices. This controller will interface with industry standard switches and sensors. This is a simplistic controller with limited PWM capability. All digital mobile controllers come with free programming software and a program      template to facilitate fast control program development.


  • Ideally suited to extreme automotive and industrial applications, static or mobile

  • Rugged heavy duty design with output short proof protection

  • PWM capable output at limited resolution

  • Integrated output and fault Tell-Tail LED's providing feedback for diagnostic and operational monitoring

  • Digitally hardened against EMI and ESD

  • Card edge connector design for easy installation

  • Environmentally sealed for extended service life

  • Operating temperature - 40°C to +85°C

  • Operating voltage 9 to 30 VDC

  • Controller size of 4.5" x 2.9" x 0.9"

  • Lead-Free design

  • UL 94V-0 Flame Retardant Classification

  • SAE J1455 - Recommended environmental practices for electronic equipment  design (Heavy duty trucks)

  • ASAE EP455 - Over voltage and reverse polarity protected

  • SAE J1113 - Recommended practices for shock, vibration and electromagnetic compatibility with immunity to conducted transients on power leads

  • 2 Year Warranty