6BX4

DIGITAL

CONTROLLER

CONTROLLER FEATURES:

The 6BX4 controller has been designed to interface with pneumatic, hydraulic  or electromechanical devices. This controller will interface with industry standard switches and sensors and is DEVICENET capable. All digital mobile controllers come with free programming software and a program template to facilitate fast control     program development.


  • Ideally suited to extreme automotive and industrial applications, static or mobile

  • Environmentally sealed for extended service life, IP67

  • Mechanical locking connector, (water tight)

  • Rugged heavy duty design with output short proof protection

  • In-System Flash programmable or Bootloader from CAN bus

  • PWM capable outputs with battery voltage monitoring

  • Analog inputs with voltage reference for resistive senor interface

  • CAN 2.0B Communication interface with maximum 112-controller network

  • DIP switch for equipment options

  • Integrated fault Tell-Tail LED providing feedback for diagnostic monitoring

  • Digitally hardened against EMI and ESD

  • Operating temperature - 40°C to +85°C

  • Operating voltage 9 to 30 VDC

  • Compact size of 4.65" x 5.24" x 1.41"

  • Lead-Free design

  • UL 94V-0 Flame Retardant Classification

  • SAE J1455 - Recommended environmental practices for electronic equipment  design (Heavy duty trucks)

  • ASAE EP455 - Over voltage and reverse polarity protected

  • SAE J1113 - Recommended practices for shock, vibration and electromagnetic compatibility with immunity to conducted transients on power leads

  • 2 Year Warranty

6 - Digital inputs

2 - Analog inputs selectable

1 - +5 Volt reference selectable

1 - Frequency input selectable

4 - Discrete outputs

4 - PWM and servo capable

1 - CAN 2.0B COM port selectable

Specifications:

Electrical Parameters:

Input resistance:  3.3K Ohms                             

Input voltage range: +/- 30 VDC

Pulse input range: +/- 200VDC @ 15% D.C.

Analog voltage range: 0 to 5 VDC

Frequency input: 0 to 100KHz

CAN 2.0B ISO-11898 1Mb/s

Operating voltage: 9 VDC to 30 VDC

Quiescent current: 18mA

Operating Temperature: - 40°C to +85°C

Environmental protection:                            Nylon 6/6 thermoplastic sealed housing with mechanical locking connector

Output resistance: 0.038 Ohms @ 25°C

Output current: 3 Amps maximum continuous.

Outputs can be combined for high power output

Outputs are short circuit protected and open circuit monitored

Inductive load protected, repetitive 3 Amp maximum

Voltage swing: 0V to B+ (Battery Voltage)

PWM duty cycle: 0 to 100%

Reverse voltage protected

100% CMOS logic for greatest noise      immunity

MCU Parameters:

Microchip RISC PIC18F 8-bit Microcontroller

High performance Flash Microchip PIC18F4480

40Mhz = 100nS Fast execution time

16 kByte Flash memory

256 Byte EEPROM

768 Byte RAM

Priority interrupt driven timing control

31 level deep hardware stack

Brown-out detection circuitry for controller reset


Special MCU Features:


10-bit PWM modules

Power-on reset (POR)

Power-up timer (PWRT)

Watchdog timer (WDT)

Power saving sleep mode

In-circuit programming

Controller data sheet and connection detail…………………………...

Free programming template…………………………………………...

For best printing, check PDF viewer box for "Print as Image"

Accessories:

Microchip MCU datasheet PIC18F4480……………………………...

Free MPLAB IDE controller programming software……...………….

Connector with side locking feature:


12 Pole interface connector                                            P/N   CON12GD

Grey polarization "A" cavity

Contact socket-solid:

The contact socket is crimped to the lead wires

20 to 24 AWG 7.5 amp maximum


Contact socket, 15 per package                          P/N   CONSSD

Connector sealing plug:

This plug allows for sealing of unused input or output cavities


Sealing plug, 10 per package                              P/N   CONPD   

Contact socket-formed:

The contact socket is crimped to the lead wires

16 to 18 AWG 13 amp maximum


Contact socket, 100 per package                         P/N   CONSFD

Hand crimp tool, stamped and formed contacts:

This hand tool will crimp contacts for both

16 to 18 AWG sockets


Crimp tool, S&F                                                 P/N   CONTSFD

Hand crimp tool, solid contacts:

This hand tool will crimp contacts for both

20 to 24 AWG sockets


Crimp tool, Solid                                                 P/N   CONTSD

Home | Products | Support | Order | Contact | Legal                  Copyright Interphasic LLC. All rights reserved

6BX4 Sales Brochure…………………………………………………