MODEL 13BX5

Placeholder

 

Information

13 – Digital inputs
2 – Analog inputs selectable
1 – Frequency input selectable
5 – discrete outputs
4 – PWM outputs capable
2 – RS-485 COM ports

Description

• Ideally suited to extreme automotive and industrial applications, static or mobile
  

• Environmentally sealed for extended service life, IP67
  

• Mechanical locking connectors, (water tight)
  

• Rugged heavy duty design with output short proof protection
  

• In-System flash programmable
  

• PWM capable outputs with battery voltage monitoring
  

• Dual RS-485 Communication interface with maximum 64-controller network
  

• 4 position DIP switch for equipment options
  

• Integrated fault Tell-Tail LED providing feedback for diagnostic monitoring
  

• Digitally hardened against EMI and ESD
  

• Operating temperature – 40°C to +85°C
  

• Operating voltage 9 to 30 VDC
  

• Compact size of 4.65″ x 5.24″ x 1.41″
  

• Lead-Free design
  

• UL 94V-0 Flame Retardant Classification
  

• SAE J1455 – Recommended environmental practices for electronic equipment  design (Heavy duty trucks) 

Electrical parameters

•  Input resistance: 3.3K Ohms
• Input voltage range: +/- 30 VDC
• Pulse input range: +/- 200VDC @ 15% D.C.
• Analog voltage range 0 to 5 VDC
• Frequency input: 0 to 100KHz
• Operating voltage: 9 VDC to 30 VDC
• Quiescent current: 18mA
• Operating Temperature: – 40°C to +85°C
• Environmental protection:
  • Nylon 6/6 thermoplastic sealed housing with mechanical locking connectors
  • Output resistance: 0.038 Ohms @ 25°C
  • Output current: 3 Amps maximum continuous.
  • Outputs can be combined for high power output
  • Outputs are short circuit protected and open circuit monitored
  • Inductive load protected, repetitive 3 Amp maximum
  • Voltage swing: 0V to B+ (Battery Voltage)
  • PWM duty cycle: 0 to 100%
  • Reverse voltage protected
  • 100% CMOS logic for greatest noise immunity

MCU Parameters

•  Microchip RISC PIC16F 8-bit Microcontroller
• High performance Flash Microchip PIC16F874A
• 20Mhz = 200nS Fast execution time
• 4 kByte Flash memory
• 128 Byte EEPROM
• 192 Byte RAM
• Interrupt driven timing control
• 8 level deep hardware stack
• Brown-out detection circuitry for controller reset
• Special MCU Features:
  • 10-bit PWM modules
  • Power-on reset (POR)
  • Power-up timer (PWRT)
  • Watchdog timer (WDT)
  • Power saving sleep mode
  • In-circuit programming

Connector with side locking feature:

12 Pole interface connector     

P/N   CON12GD

Grey polarization “A” cavity

Connector with side locking feature:

12 Pole interface connector                                            

P/N   CON12BD

Black polarization “B” cavity

Connector sealing plug:

This plug allows for sealing of unused input or output cavities

Sealing plug, 10 per package                             

P/N   CONPD

Contact socket-solid:

The contact socket is crimped to the lead wires

20 to 24 AWG 7.5 amp maximum

Contact socket, 15 per package                          

P/N   CONSSD

Contact socket-formed:

The contact socket is crimped to the lead wires

16 to 18 AWG 13 amp maximum

Contact socket, 100 per package                         

P/N   CONSFD

Hand crimp tool, stamped and formed contacts:

This hand tool will crimp contacts for both

16 to 18 AWG sockets

Crimp tool, S&F                                                 

P/N   CONTSFD

Hand crimp tool, solid contacts:

This hand tool will crimp contacts for both

20 to 24 AWG sockets

Crimp tool, Solid                                                 

P/N   CONTSD